NEC Univerge SV8100 Features And Specifications Manual page 589

UNIVERGE SV8100
Program
Program Name
Number
20-08-10 Class of Service Options
(Outgoing Call Service) – Signal/
Voice Call
20-09-05 Class of Service Options
(Incoming Call Service) – Signal/
Voice Call
Operation
To enable Handsfree Answerback for your incoming Intercom calls:
1. Press idle Speaker.
2. Dial 721.
3. Press Speaker to hang up.
This disables Forced Intercom Ringing.
To enable Forced Intercom Ringing for your incoming Intercom calls:
1. Press idle Speaker.
2. Dial 723.
3. Press Speaker to hang up.
This disables Handsfree Answerback.
To change the way your Intercom call signals the extension you are calling:
1. Dial 1.
If ringing, your call voice-announces. If voice-announced, your call starts to ring the destination. This option is
also available at single line telephones.
SV8100 Features and Specifications Manual
Description/Comments
In an extension Class of Service,
enable (1) or disable (0) an
extension ability to toggle between
Handsfree Answerback and Forced
Intercom Ringing for outgoing
Intercom calls (dial 1 or Service
Code 712).
Turns Off or On an extension ability
to enable Handsfree Answerback or
Forced Intercom Ringing for their
incoming Intercom calls.
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Issue 1.0
Level
2 3
2 - 565