Message Waiting - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Description
An extension user can leave a Message Waiting indication at a busy or unanswered extension requesting
a return call. The indication is a flashing MW lamp at the called extension and a steadily lit MW lamp on
the calling extension. Answering the Message Waiting automatically calls the extension which left the
indication. Message Waiting ensures that a user does not have to recall an unanswered extension. It also
ensures that a user does not miss calls when their extension is busy or unattended. Additionally, Message
Waiting lets extension users:
View and selectively answer messages left at their extension (display multiline terminal only)
Cancel all messages left at their extension
Cancel messages they left at other extensions
An extension user can leave Messages Waiting at any number of extensions. Also, any number of
extensions can leave a Message Waiting at the same extension. A periodic VRS announcement may
remind users that they have Messages Waiting.
Message Key will Operate as Voice Mail Key
The system enhances a telephone Message key function when connected to a system which has voice
mail installed. When an extension receives a voice mail, the Message key can be used to check the
number of messages in voice mail, as well as call the voice mail to listen to the messages. If no Voice Mail
Programmable Function Key is defined (Program 15-07-01, code 77), the telephone Message Waiting
LED flashes to indicate new messages.
This option is not available with a networked voice mail – the voice mail must be local.
Refer to the Voice Mail Integration (Analog) on page 2-1253
LED Color Indication
The software allows you to select whether the Message Wait LED located at the top of the multiline
terminal flashes green (0) or red (1) when a Message Wait indication is flashing. By default, this option is
set to flash red.
If this LED is also used for voice mail indications (no Programmable Function Key programmed for voice mail), and
there are both voice mail messages and Message Wait indications, the color set for Message Wait overrides the color
used for voice mail indications (red).
Conditions
Reminder messages require a DSP daughter board for VRS messages.
Analog ports from APA or APR adapters do not provide Message Waiting lamping.
When a user responds to a Message Waiting, the system does not cancel the Message
SV8100 Features and Specifications Manual

Message Waiting

feature for the feature operation.
Issue 1.0
2 - 723