NEC Univerge SV8100 Features And Specifications Manual page 235

UNIVERGE SV8100
Program
Program Name
Number
15-02-40 Multiline Telephone Basic Data
Setup – Additional Dial for Caller
ID Call Return
15-03-09 Single Line Telephone Basic Data
Setup – Caller ID Function – For
External Module
15-03-10 Single Line Telephone Basic Data
Setup – Caller ID Name
15-03-11 Single Line Telephone Basic Data
Setup – Caller ID Type
15-07-01 Programmable Function Keys
20-02-08 System Options for Multiline
Telephones – LCD Display
Holding Time
20-06-01 Class of Service for Extensions
20-08-15 Class of Service Options
(Outgoing Call Service) – Block
Outgoing Caller ID
SV8100 Features and Specifications Manual
Description/Comments
Enter the digits to be dialed in front
of the Caller ID when using Caller
ID Call Return.
Enable (1) or Disable (0) the Caller
ID FSK signal for an external Caller
ID module or a 3rd party vendor
telephone with Caller ID display.
If voice mail is used, this setting
must be disabled or the system
integration codes for disconnect
are incorrect. For Caller ID Sender
Queuing, set this option to "1".
Determine whether or not a single
line telephone extension user's
telephone should display the Caller
ID name.
Determine whether the Caller ID
type is FSK or DTMF.
Use to assign functions to multiline
terminal line keys.
This time determines how long a
user display shows Caller ID for a
second incoming call.
Assign a Class of Service (1~15) to
extensions.
Turns Off (0) or On (1) a user Class
of Service from automatically
blocking outgoing Caller ID
information when a call is placed. If
block is enabled, the system
automatically inserts the Caller ID
block code 1831 defined in
Program 14-01-21 before the user
dialed digits (this requires Program
14-02-10 to be enabled). If block is
disabled, the system outdials the
call just as it was dialed by the
user.
Assigned Data
1
Up to four digits
#
(0, 1~9, , )
(default not assigned)
0 = Disable
1 = Enable
(default = 0)
0 = Disable
1 = Enable
(default = 1)
0 = FSK
1 = DTMF
(default = 0)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99 (Appearance
Function Code)
(Service Code 752 by
default)
0~64800 (seconds)
(default = 5 seconds)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 0 for
COS 1~15)
Issue 1.0
Level
2 3
2 - 211