NEC Univerge SV8100 Features And Specifications Manual page 488

Issue 1.0
To place an internal call:
1. Press TALK.
2. Dial the Station Number.
- OR -
Press (F1~F4), programmed for Direct Station Selection (DSS).
3. Announce the call after tone burst or wait for call to be answered.
To place an outside call:
1. Press TALK.
X icon is displayed
2. Dial trunk access code and number
- OR -
Select trunk appearance and dial number.
Wait for call to be answered.
To answer an Incoming Ringing Call:
1. When the handset is in the charger, lift it.
2. When the handset is out of the Base Unit, press TALK if ringing line preference is assigned.
icon is displayed.
3. Talk.
To place a call on Hold (internal or outside):
With a call in process, press HOLD.
To retrieve a held call, press flashing F1~F4.
After a programmed time, the held call recalls to the originating terminal.
To redial a number:
1. Press REDIAL.
2. The previously dialed number is called.
To transfer a call:
1. With a call in process, press TRANSFER.
2. Dial Station Number.
- OR -
Press (F1~F4) programmed for Direct Station Selection (DSS).
3. Announce call (optional).
4. Press TALK to complete transfer.
2 - 464
icon is displayed.
.
icon is displayed.
UNIVERGE SV8100
term
Cordless II Terminal
D