Epson FX-80 Operation Manual page 88

ESC 8
'Mung ESC 8 - Paper-end detector disable
'tJ.Ji:¥.{1t.h'
CHR$(27); "8";
Iij!hWito"'
Disables paper-end signal.
L
i
ESC
'Mung
li!hlgh.lI'
Input of this code enables the printer to print data to the last line of
the paper when the paper is nearing its end.
With the DIP switch pin 1-3 on the control circuit board set to the ON
position, the printer is placed in the ESC 8 condition upon
application of power.
ESC 9
9
ESC 9 - Paper-end detector enable
CHR$(27);19";
Enables paper-end signal.
This code cancels the ESC 8 condition, and the printer cannot
continue printing and enters OFF-LINE mode when there is no
paper. With the DIP switch pin 1-3 set to the OFF position, the
printer is placed in the ESC 9 condition upon application of power.
ESC 8
3-37