Epson FX-80 Operation Manual page 145

Fx printer
Hide thumbs Also See for FX-80:
Table of Contents

Advertisement

ESC I
IUIDI
ESC I - Control code selection
ICMit{it."1
CHR$(27};II";CHR$(n};
(1) n
=
0 or 48 Selects as Control code.
(2) n
=
1 or 49 Selects as Printable characters.
ii!bNiMIi
Selects control codes or printable characters.
This code is used to select the undefined codes in (0)0 to (31)0 and
(128)0 to (159)0 as either control codes or printable characters.
(1) n=O or 48 Control codes (Undefined codes are ignored.)
(2) n=l or 49 Printable characters
I Dim",
(W,
10 'Sel ects Ccmtrol code
20 LPRINT CHRS(7): 'BEL code
30 LPRINT CHRS(O): 'NUL code
40
LPR I NT
c~·m~t-
(27) ; "
I
/I ;
CHR:t (
1 ) ;
50 LPRINT CHRS(7): 'Printable code
60
LPRINT CHRS(O); 'Printable code
70 L.PRINT CHRS(27);"I";CHRS(0);
130
END
<beep>
<beep>
NOTES:
1. This command does not influence such control codes as CR, LF, etc.
2. In the FX printer, international characters are provided in ASCII (0)
D
to
(31)
D
and
(128)
D
to
(159)
D
which are usually set as unprintable codes. These codes
become printable upon input of the ESC I code.
3-94

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fx-100

Table of Contents