Epson FX-80 Operation Manual page 66

U\.,.£I U\.,,,
DC2
DC2 -
Condensed mode cancel
G4oJi4{1t.lI'
CHR${1S);
dhmb
Cancels Condensed print mode.
The DC2 code cancels the Condensed print mode set by the SI code.
SI and ESC M
10 'Device Control 2
20 LPRINT CHR$(15);"Condensed Mode";
30 LF'RINT CHR$(18);"
=====»
Now in Pica-sized Mode"
Condensed l10de
====>}
Now in Pica-sized Mode
NOTE:
Although the Enlarged print mode set by the SO code can be cancelled by line feed,
the Condensed mode set by the SI code cannot.
DC3
I"
\
.
DC3 - Deselection of the printer
CHR$(19);
Deselects the printer.
The DC3 code places the printer in the Deselected state. In other
words, it disables the printer to receive data.
DCl
I
L
NOTE:
When the DCl and DC3 codes are used, the DIP switch pin 2-1 on the control circuit
board should be in the "OFF" position.
3-15