Mac Address - Bosch Mastertech M-VCI Installation Manual

Step 2 - Connecting Your
Wired Devices "Special
Instruction for Type II"
Important: Use the same PC that
was originally connected to the
modem for these steps.
f Connect the computer to the
LAN port of the NETGEAR
Router
f Reboot the computer (to
renew the NETGEAR Smart
Wizard IP Address)
f Open your Web Browser
f Enter http://192.168.10.1 into
your browser address bar and
Press: <Enter>
f Enter User ID and Password
– User ID: admin
– Password: Bosch_VCI_AP
– Click: OK
Caution! Do not connect the
router to the cable/DSLmodem at
this time.
M-VCI – NETGEAR® Router Installation Guide Index | Version 1.0 | April 2011
Installation Steps | Step 2 | 8
Step 2 - Connecting Your
Wired Devices "Special
Instruction for Type II"
(Setting NETGEAR Router
configuration)
f Click: Basic Settings
Step 2 - Connecting Your
Wired Devices "Special
Instruction for Type II"
(Setting NETGEAR router

MAC Address)

f Click: Use Computer MAC
address
f Click: Apply
f Wait for the router to apply
settings
Robert Bosch LLC