GE D20MX Instruction Manual page 128

128
5.4.2. Click OK. Then, navigate to the DVD/CD drive or the ISO Image sub-folder
nested two levels into the folder extracted from the D20MX
Documentation CD zip file. Then, navigate to Configuration Files >
DefaultPointDescriptions > B119-1N LAN Redundancy Manager. Select
DIDESC.TXT and click Select.
5.4.3. Confirm the pseudo point descriptions changed as shown below. Click OK
to accept the change and to close each window.
5.4.4. Carefully configure all other enabled applications based on their
respective configuration guides. This is required before a configuration
can be successfully generated without errors.
GE INFORMATION
APPENDIX D: USING CONFIGPRO WITH D20MX
D20MX INSTRUCTION MANUAL