Ringback_Tone_Rpt - Panasonic KX-UDS124 Administrator's Manual

Default Value

RINGBACK_TONE_RPT

Value Format
Description
Value Range
Default Value
RINGBACK_TONE_TIMING
Value Format
Description
Value Range
Default Value
HOLD_TONE_FRQ
Value Format
Description
Value Range
Default Value
HOLD_TONE_GAIN
Value Format
Description
Value Range
Default Value
Document Version 2013-03
0
Integer
Specifies whether the ringback tone is repeated.
0–1
–
0: No Repeat
–
1: Repeat
1
Comma-separated Integer
Specifies the pattern, in milliseconds, of ringback tones using up to 10
whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
•
Avoid setting 1–50 for any of the values.
0–16000 (0: Infinite time)
60,2000,3940
Comma-separated Integer
Specifies the dual-tone frequencies, in hertz, of the hold tone using 2
whole numbers separated by a comma.
0, 200–2000 (0: No tone)
425
Integer
Specifies the gain, in decibels, of the hold tone.
-24–6
0
4.4.2 Tone Settings
Administrator Guide 203