Replacing The Air Filter; Fitting The Lens Cap - Sony Bravia HDMI VPL-AW15 Operating Instructions Manual

Hide thumbs Also See for Bravia HDMI VPL-AW15:
Table of Contents

Advertisement

Replacing the Air
Filter
When "Please replace the filter." appears on
the screen, you should replace the air filter.
The air filter should be replaced every 1,500
hours. This value varies depending on the
environment or how the projector is used.
1,500 hours are approximate.
Bm
• For details on how to attach and remove the
air filter, see "Replacing the Lamp and the
Air Filter and cleaning the Ventilation holes
(intake)" Steps 7 to 11.
(~
page 56)
• When you remove the air filter, be careful
not to let any dust fall into the projector.
• Replacing the air filter is crucial to maintain
the good performance of the projector or to
prevent malfunction to it. When a warning
message for replacing the air filter appears,
replace the air filter immediately.
58
Fitting the lens cap
When fitting the lens cap onto the lens,
position the lens cap so that the concave on
the side of the lens cap will fit the zoom
lever, as shown in the illustration.
Lens cap
Zoom lever
mmI
The lens cap will not fit if the position is not set
correctly.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vpl-aw10Bravia hdmi vpl-aw10

Table of Contents