Turning Off The Power; Selecting The Wide Screen Mode - Sony Bravia HDMI VPL-AW15 Operating Instructions Manual

1
Press the I/C) (On/standby) switch.
A message "POWER OFF?" appears on the screen.
2
Press the I/C) (On/standby) switch again before the message disappears.
The I/C) (On/standby) indicator flashes in green and the fan continues to run to reduce the
internal heat. First, the I/C) (On/standby) indicator flashes quickly, during which you will
not be able to light up the I/C) (On/standby) indicator with the I/C) (On/standby) switch.
3
Confirm that the fan stops running and the I/C) (On/standby) indicator
lights in red.
You can tum off the projector by holding the I/C) (On/standby) switch for about 1 second,
instead of performing the above steps.
Selecting the Wide Screen Mode
You can enjoy various wide screen modes according to the video signal received.
Press WIDE MODE.
Each time you press the button, you can
change the "Wide Mode" setting in tum.
~
~ ~
I
MENU
I
I
REAL COLOR PROCESSING
!
:It~o~
MODE
I
*
RCPbutton: VPL-AW15 only
28
You can also select it using the menu.
(r7ff
page 44)