Information Menu; About The Preset Memory No - Sony Bravia HDMI VPL-AW15 Operating Instructions Manual

Information Menu
The Information menu displays the model name, serial number, the horizontal and vertical
frequencies of the input signal and the cumulated hours of usage of the lamp.
Information
Model Name: VPL-AW15 or VPL-AW10
CD
Model Name
Serial No.
Serial No.
1.11
fH/fV
Hz
Memory No.
m
Lamp Timer
-~
Signal type
==a
Model Name
Displays the model name (VPL-AW 15 or VPL-AW 10) and the serial
number.
Serial No.
Displays the serial number.
fH (horizontal frequency)
Displays the horizontal frequency of the input signal.
fV (vertical frequency)
Displays the vertical frequency of the input signal.
Memory No.
Displays the preset memory number of the input signal.
Signal type
Displays the type of the input signal.
Lamp Timer
Indicates how long the lamp has been turned on (total usage).
1m
• ill (horizontal frequency) and tV(vertical frequency) may not be displayed depending
on the input signal used on the projector.
• You cannot change any items listed above.
This projector has 39 types of preset data for input signals (the preset memory). When the
preset signal is input, the projector automatically detects the signal type and recalls the
data for the signal from the preset memory to adjust it to an optimum picture. The memory
number and signal type of that signal are displayed in the Information
0)
menu.
You can also adjust the preset data through the Screen
ED
menu.
This projector also contains 20 different user memories beside the preset memories used
for inputting computer signals. You can save input signals that have not been preset on
these user memories.
When an unpreset signal is input for the first time, a memory number is displayed as
o.
When you adjust the data of the signal in the Screen
ED
menu, it will be registered to the
projector. If more than 20 user memories are registered, the oldest memory is always
overwritten.
See the chart on page 61 to find if the signal is registered to the preset memory.
1m
When the aspect ratio of input signal does not match the screen size, a part of the screen is displayed in black.
50