Table of Contents
Advertisement
3.7.7
Memory Test
When set to Enabled, this parameter allows the system to perform a RAM test during the POST routine. When set
to Disabled, the system detects only the memory size and bypasses the test routine. The default setting is
Disabled.
3.7.8
Configuration Table
This parameter allows you to enable or disable the appearance of the configuration table after POST but before
booting. The configuration table gives a summary of the hardware devices and settings that BIOS detected during
POST.
3.7.9
Boot from LANDesk Service Agent
The LANDesk Service Agent is a pre-boot agent that enables the system to be booted from a remote management
server. It allows the Configuration Manager to take control of the system configuration before the system's
operating system boots. You may find remote booting useful when installing, repairing, or upgrading system's OS
and other installed applications.
Set this parameter to Enabled to allow the system to boot from LanDesk Service Agent. Otherwise, select
Disabled.
Index
75
Advertisement
Chapters
Table of Contents
