Ldap Server - D-Link DSA-6100 User Manual

4.4.1.4 LDAP Server

The system may authenticate users using external LDAP server. You may configure both primary and secondary
LDAP server for fault tolerance. LDAP refers to Lightweight Directory Access Protocol, a set of protocols for
accessing information directories. The system may authenticate users using external LDAP server including both
primary and secondary. Choose "LDAP" in the Server Name field, the hyperlink beside the pull-down menu will
become "LDAP Setting".
Click the hyperlink LDAP Setting for further configuration. Enter the related information for the primary server
and/or the secondary server (the secondary server is not required). The blanks with red asterisk are necessary
information. These settings will become effective immediately after clicking the Apply button.
Server IP: Enter the IP address/domain name of the LDAP server.
Port: Enter the Port of the LDAP server, and the default value is 389.
Base DN: Enter the distinguished name of the LDAP server.
Binding Type: There are four binding types, User Account, Anonymous, Specific DN and Windows AD to
select.
User Account: Use the user account's login username and password of the system, and then select one
Account Attribute (UID, CN) to access the LDAP server.
Account Attribute: Attribute of LDAP accounts.
DSA-6100 User Guide
90