Table of Contents
Advertisement
Fragment Length: The fragmentation threshold determines whether packets will be fragmented. Enter
a value between 256 and 2346.
RTS Length: Enter a value between 256 and 2346.
Transmit Power: Select either Full, Half(-3dB), Quarter(-6dB), Eighth (-9dB) or Minimum (minimum
power).
Wireless B/G mode: Enable supporting 802.11mixed mode 802.11b or 802.11g only.
Preamble: The length of the CRC (Cyclic Redundancy Check) block for communication between the
Access Point and roaming wireless adapters. Select either Short Preamble or Long Preamble.
Connection Settings:
Multi-SSID: Select Disabled, Multi-SSID with VLAN or Multi-SSID without VLAN. While Multi-SSID
enabled, Super G Mode will be disabled automatically. While selecting Multi-SSID with VLAN,
Multi-SSID settings could configure up to multiple SSID. Click Configure button to setup SSID
Configuration, the information of SSID, Broadcast SSID, WMM, and Security.
SSID Configuration Page:
SSID: Service Set Identifier.
Broadcast SSID: Select this option to enable the SSID to broadcast in your network. When
configuring the network, it is suggested to enable this function but disable it when the
configuration is complete. With this enabled, someone could easily obtain the SSID information
with the site survey software and get unauthorized access to a private network. With this
disabled, network security is enhanced and can prevent the SSID from being seen on
networked.
WMM: WMM stands for Wi-Fi Multimedia, by enabling this feature. It will improve the user
experience for audio and video applications over a Wi-Fi network.
Security: Choose one of security types from SSID Configuration, also selecting whether WEP
included or not.
Chapter 4. Web Interface Configuration
53
Advertisement
Table of Contents
