Table of Contents
Advertisement
Note: After finishing the configuration, please click Apply and pay attention to see if a restart message appears at
the bottom of the screen. If the message appears, the system must be restarted to allow the configurations to take
effect. All on-line users will be disconnected during restart.
Web Management Interface
The DSA-6100 provides a web management interface for configuration. After completing the hardware installation,
the administrator can configure the DSA-6100 via web browsers with JavaScript enabled such as Internet Explorer
version 6.0.
After the basic installation has been completed according to the instructions of the previous chapter, the DSA-6100
can further be configured with the following steps:
1.
Use the network cable of the 10/100BaseT to connect a PC to the Private LAN (LAN2), and then start a
browser (such as Microsoft IE). Next, enter the gateway address for that port in the opened webpage, the
default which is https://192.168.1.1. A login screen will then appear. Enter "admin" for the default username
and password and click Enter to log in.
Once the DSA-6100 has been connected, the Administrator Login Page will appear. Enter "admin" for both
the default username and password in the Username and Password fields. Select the Enter button to log in.
OPTION
Status
Tool
FUNCTION
System Status
Interface Status
Current Users
Traffic History
Notification Configuration
Online report
Change Password
Backup /Restore Setting
Firmware Upgrade
Ping Utility
Restart
DSA-6100 User Guide
12
Advertisement
Table of Contents
