Configuration Wizard (Also Served As Quick Installation Guide) - D-Link DSA-6100 User Manual

4.1.1 Configuration Wizard (Also served as Quick Installation Guide)

There are two ways to configure the system. One is by using the Configuration Wizard, and the other is by
changing the setting manually. The Configuration Wizard uses seven simple steps to provide the easy set up of the
DSA-6100. These steps may also be used as the Quick Installation Guide. The 7 steps are listed below:
1. Change the Admin Password
2. Choose the System's Time Zone
3. Set the System Information
4. Select the Connection Type for WAN1 Port
5. Configure LAN1
6. Select Authentication Method
7. Restart
Click System Configuration to go to the System Configuration page.
Click the System Configuration from the left menu, and the System Configuration page will appear. Next, click
on the buttons, Configuration Wizard then Run Wizard to start the wizard.
Running the Wizard
A welcome screen that briefly introduces the 7 steps will appear. Click Next to begin.
Chapter 4. Web Interface Configuration
15