Navigate Through The Menu - Bosch Integrus Operation Manual

Language Distribution System
7.1.2

Navigate through the menu

main menu
item number
Figure 7.2: Menu item screen elements
Operating the menu is always a sequence of alternating turns and pushes:
Turn the button to:
–
–
–
Push the button to:
–
–
–
–
After 3 minutes of inactivity, the display automatically switches back to the first item of the
Main menu (Transmitter Status).
Each menu item is identified by a number (for the Main menu) or by a number plus a character
(for the sub-menus). The item identification can be found at the start of the first line and is
used to navigate to and from sub-menus.
Most menu items have one or more settable configuration options. The value of an option can
be changed by selecting a value from a list of available values.
To navigate through the main menu:
1.
To jump to a sub-menu:
1.
2.
Notice!
To enter the Setup sub-menu, push and hold the button for at least 3 seconds.
To navigate through a sub-menu:
1.
2.
Bosch Security Systems B.V.
sub-menu
item character
4D Ch. Quality
Per Channel
Cycle through the menu items within a menu (the menu item number and title on the first
line is blinking).
Go to a settable option within a menu item (a blinking cursor moves through the menu
screen).
Cycle through the available values for a settable option (the value is blinking).
Confirm a chosen menu item (the menu item number and title stops blinking, a blinking
cursor appears).
Go to a sub-menu (the sub-menu item character starts blinking).
Confirm the selection of a settable option (the cursor disappears, the option value starts
blinking).
Confirm a selected value for a settable option (the value stops blinking, the cursor
appears again).
Turn the button to move through the Main menu items. The item number and title starts
blinking. (The first item, Transmitter Status, doesn't blink.)
Navigate in the Main menu to an item with three dots (e.g. 'Setup...').
Push the button to go to the sub menu. The submenu item character and title starts
blinking
Turn the button to move the cursor to the submenu item character.
Push the button. The item character and title starts blinking.
menu item title
three dots indicate
that the item has a
...
sub-menu
Operation manual
Configuration | en 49
4D Channel 12
Stereo PQ In 03
option values
2013.11 | V1.4 |