Show Ip; Procurve Access Point 530 - HP 530 Management Manual

Example
ProCurve Access Point 530# show interface ethernet
Ethernet interface:
---------------------
Description
MAC address
Speed-duplex
Administrative status Enabled
Link status
Management VLAN ID
Untagged-VLAN ID
Spanning Tree (STP)
STP Port State
STP Hello Interval
STP Forward Delay
STP Bridge Priority
Bytes Rx
Packets Rx
Compressed Rx
Mcast packets Rx
Dropped Rx packets
FIFO overflows Rx
Frame errors Rx
Total Rx errors

ProCurve Access Point 530#

show ip

This command displays the IP address information, static default gateway
router configuration and the DHCP client configuration/status on the device.
Syntax

show ip

Default Setting
N/A
Command Mode
Manager Exec
Ethernet
00:14:C2:A5:08:CB
auto
[add-in-future]
1 (U)
1
Enabled
forwarding
10.0
10
255
70912184 Bytes Tx
194926 Packets Tx
0 Compressed Tx
0 Carrier errors Tx
0 Dropped Tx packets
0 FIFO overflows Tx
0 Packet collisions Tx
Total Tx errors
Command Line Reference
Ethernet Interface Commands
30955292
286333
0
0
0
0
0
0
9-99