Enable (Ethernet); Disable (Ethernet) - HP 530 Management Manual

Command Line Reference
Ethernet Interface Commands
9-92
Command Mode
Global Configuration
Example:
ProCurve Access Point 530(config)# interface ethernet
ProCurve Access Point 530(ethernet)#

enable (ethernet)

This command enables the specified interface.
Syntax
enable
Default Setting
N/A
Command Mode
Ethernet Interface Configuration
Example:
ProCurve Access Point 530(config)# interface ethernet
ProCurve Access Point 530(ethernet)# enable
ProCurve Access Point 530(ethernet)#

disable (ethernet)

This command disables the specified interface.
Syntax
disable
Default Setting
N/A
Command Mode
Ethernet Interface Configuration