Setting An Operating Configuration - HP StorageWorks 3800ux User Manual

Optical jukebox
Hide thumbs Also See for StorageWorks 3800ux:
Table of Contents

Advertisement

Configuration Name
SLTS 230-238
ON/OFF
POWER SECURE
ON/OFF
REP RECOVERED
ON/OFF
CONF40 ON/OFF
MS DOOR
OPEN/CLOSED

Setting an operating configuration

READY > ADMIN* > CONFIG*
To set an operating configuration:
1. With READY displaying on the control panel, press NEXT until ADMIN*
2. Enter the administration password (see
3. TEST* displays. Press NEXT until CONFIG* displays and then press
HP StorageWorks 3800ux/7100ux Optical Jukebox User's Guide
The ON configuration allows access to slots 230 to 238.
The OFF configuration prevents access to slots 230 to
238, making slot 229 the last available slot.
Note:
Slots 230 to 238 may not be supported by some
jukebox application software.
Toggles between ON and OFF. The ON configuration
retains your selection of the SECURE MS configuration
through power cycling (or power outage). The OFF
configuration allows the jukebox to return to the default
setting of this configuration after a power cycling.
Toggles between ON and OFF. When set to ON,
recovered errors are reported; when set to OFF,
recovered errors are not reported.
Caution:
result in a service call. Used by service
personnel only.
Toggles between OPEN and CLOSED. When set to
OPEN, the mailslot door always remains open; when set
to CLOSED, the mailslot door remains open for ten
seconds after disks are loaded or ejected, automatically
closes when the mailslot is empty, and does not reopen
until you press the LOAD button.
displays.
password" on page 35).
ENTER.
Description
Changing this configuration may
"Entering the administration menu
Navigation
Default
SLTS
230-238 OFF
POWER
SECURE OFF
REP
RECOVERED
ON
NA
CLOSED
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks 7100ux

Table of Contents