System Configuration; System Requirements - Sony BSV-M1 - StorStation NAS Server Operating Instructions Manual

System Configuration

System Requirements

Normally, this server (the head unit) is connected to the library unit. Using the
backup application built into the server, you can integrate and backup data to the
library from backup clients. Connecting the server directly to a network allows
you to configure the server and perform maintenance remotely through a web
browser.
The illustration below shows the server in conjunction with the Sony AIT
Library (LIB-162).
Computer for setup
and management
Make server settings and
perform maintenance
File server File server
Backup clients
Note
• Connect the server to the library unit with a SCSI cable.
• Control the library unit from this server.
The hardware and software required to control this server are as follows.
Computer for Setup and Management
Prepare a computer that can run one of the following browsers.
• Browser Software
- Microsoft Internet Explorer 5.0 (for Windows)
- Netscape Communicator 4.7 (for Windows)
- Netscape Communicator 4.7 (for Macintosh)
- Netscape Communicator 4.7 (for Solaris and Linux)
Library
The following Sony library is required:
• LIB-162
Head unit (BSV-M1)
LAN 100M HDD SYSTEM
POWER
Ultra 2 SCSI
Library unit (LIB-162)
Ethernet
application server
Chapter 1 Introduction
MENU ENTER CANCEL
7