Saving Settings (Backup); Shutting Down The System; Shutting Down The System From The Control Panel - Sony BSV-M1 - StorStation NAS Server Operating Instructions Manual

Saving Settings (Backup)

Shutting Down the System

Shutting Down the System from the Control Panel

After changing settings from the control panel or a browser, make sure you
save (back up) the settings. For more information regarding saving settings,
refer to "Status" (page 36) in Chapter 4, "Using the BSV-M1
Administration Menu".
The system can be shut down either from the control panel or a browser.
Caution
• After the system is shut down, the server power goes off automatically.
• When shutting down the system, do not use the power switch on the rear
panel.
• Confirm that the system is not backing up data, and then shut it down. If the
system is shut down during data backup, data could be lost.
• The system can be configured so that it shuts down automatically at a
specified day and time on a weekly basis. Refer to "Shutdown" (page 38) in
the "Maintenance Menu" section of Chapter 4, "Using the BSV-M1
Administration Menu".
1
When the server is idle, press the
[MENU] button for two seconds.
2
Press the [ENTER] button.
If you are asked for a password,
enter the password.
Note
If the administrator password has not been changed from "admin",
password verification is skipped.
3
Press the V button twice to display
"Shutdown System", then press the
[ENTER] button.
A confirmation message appears.
Note
If you want to restart the system, first display "Reboot System", then press
the [ENTER] button twice.
Configuration
Network
Shutdown System
[ENTER] to shutdown
[CANCEL] to abort
Chapter 2 Basic Use
20