Transfer D20/D200 Configurations To The D20Mx - GE D20MX User Manual

Transfer D20/D200 configurations to the D20MX

68
11. Setup LAN Communication
11.1. Select the Project: TEST_PROJ tab.
11.2. Click: the D20 device.
11.3. Click the ribbon Configure group > Communications > Options.
Result: The Device Communication Options widow appears.
11.4. Click Interface tab > Connection Type.
11.5. Select iSCS LAN.
11.6. Click OK.
12. Transfer the new configuration files to the D20MX:
12.1. Select the Project: TEST_PROJ tab.
12.2. Click: the D20 device.
12.3. Click the ribbon Configure group > Sync To.
Result: A Warning message prompts you to NOT interrupt the operation and
confirms the device is connected.
12.4. Click Yes to continue.
Result: The Login window appears, prompting for User Name and Password
(use your configured login credentials, default are westronic / changeme)
Result: A Warning message indicates that the public key has CHANGED; this
appears when you are connecting to the device for the first time.
12.5. Click Yes to continue.
Result: The Transferring configuration window appears showing the transfer
status.
Result: When the transfer is complete the Device configuration transferred
successfully message appears.
12.6. Click OK.
Use this information to transfer existing D20 and D200 device configurations to the
D20MX.
The word "transfer" is used within the context of this guide to mean that the device
configuration files are moved and modified, in order to work properly on a D20 with a
D20MX processor.
If you are transferring a D20 device configuration, follow the steps in section: "Transferring
a D20 configuration to the D20MX" on page 69.
If you are transferring a D200 device configuration, follow the steps in the following
sections:
• Section: "Transferring a D200 configuration to the D20MX" on page 74
• Section: "Transferring a D20 configuration to the D20MX" on page 69
CHAPTER 5: CONFIGURING THE SOFTWARE
GENERAL D20MX HARDWARE USER'S MANUAL