GE D20MX User Manual page 72

72
14.4. Click on Disable Application(s).
Result: A warning dialog appears.
14.5. Click Yes.
Result: The warning dialog and the Application list popup disappear.
15. Import the RADIUS roles from the D20MX default configuration into the D20 device:
15.1. Double-click the D20 device.
Result: The Application List popup appears.
15.2. Double-click the WESMAINT II+ application.
Result: The WESMAINT II+ table icon set appears.
15.3. Right-click the RADIUS Role Table icon and select Import.
Result: The Select source directory dialog appears.
15.4. Browse to the folder containing the exported RADIUS Role Table, select the file
named B014RADR, and click Open.
Result: The WESMAINT II+ table icon set re-appears.
15.5. Double-click the RADIUS Role Table icon.
Result: The RADIUS Role Table editor appears.
15.6. Compare the first two columns of the RADIUS Role Table to the following figure
to confirm that the import was successful.
15.7. Click OK.
Result: The WESMAINT II+ table editor closes.
16. Import the IP Redundancy Monitor point descriptors:
16.1. Click the Project tab of the original D20 device configuration.
16.2. Double-click the D20 device.
Result: The Application List popup appears.
16.3. Double-click the System Point Database application.
Result: The System Point Database Properties dialog appears.
16.4. Select IP Redundancy Monitor and click Descriptors.
Result: The Point Descriptors dialog appears.
16.5. Click on the Import button.
Result: The Import Point Descriptors dialog appears.
CHAPTER 5: CONFIGURING THE SOFTWARE
GENERAL D20MX HARDWARE USER'S MANUAL