Table of Contents
Advertisement
NurseCall Relay Unit
4.4.2
Selection "None"
¬ RS-232 Output
None
In this case, there will be no printer/display output. This is the default setting.
4.4.3
Selection "Printer"
¬ RS-232 Output
Printer
1.
¬ Printer
24h printed ?:YES
2.
3.
4.4.4
Selection "DISPLAY ZETTLER"
¬ RS-232 Output
DISPLAY ZETTLER
1.
¬ DISPLAY ZETTLER
Rota.of Alarms:YES ¡
2.
3.
¬ DISPLAY ZETTLER
Time displayed:YES ¡
4.
5.
6.
DISPLAY
CRITER. 2 + 1 SPACES
Bosch Security Systems
if you have selected None, press
if you have selected Printer, press
Set the printing of all the daily messages sent by transmitters.
Scroll with
and
Confirm with
.
if you have selected DISPLAY ZETTLER, press
Set the rotational display of alarms.
Select YES or NO with
Set the display of the clock. The format is HH:MM.
Scroll with
and
Confirm with
.
Configure the display of the 10 identification positions . The outcome is visible at the top.
:CR ff rr b
a.
Select a field with
b.
Confirm with
.
to confirm.
£
to confirm.
¡
¡
to select YES or NO. Default value is YES.
¡
and
. Default value is YES. Confirm with
to select YES or NO. Default value is YES.
and
, change a value with
User Manual
Programming | en
to confirm.
and
F.01U.252.722 | V1 | 2011.12
23
.
.
Advertisement
Table of Contents
