NurseCall Main Unit
4.4.3
Assistance and fire priority
This command sets the assistance call and the fire alarm as priority calls.
This means that alarms of these types will be displayed first.
1.
4.4.4
Assistance and fire non priority
This command sets the assistance call and the fire alarm as non-priority calls. This means that
the last alarm is displayed, whatever its type. This is the default value.
1.
4.4.5
Special texts in German
This command sets special texts in German. The displayed criteria are:
–
–
1.
4.4.6
Standard texts in German
This command sets standard texts in German. This is the default value.
1.
4.4.7
Standard NurseCall selection
This command sets the NurseCall system as "Standard NurseCall". This is the default value.
CAUTION!
It is mandatory to perform a reset before changing this value.
See Section 4.4.2 Resetting all the parameters, page 34.
1.
UNIVERSAL NC ? NO !
Bosch Security Systems
Type the code 123991. The unit plays a melody and a confirmation message is displayed.
ASSISTANCE & FIRE
PRIORITY
Type the code 123992. The unit plays a melody and a confirmation message is displayed.
ASSISTANCE & FIRE
NONPRIORITY
BAD/WC instead of TECHNIK
HILFE-2 instead of NOTRUF2
Type the code 123007. The unit plays a melody and a confirmation message is displayed.
MULTITONE TEXTE
BAD/WC + HILFE-2
Type the code 123008. The unit plays a melody and a confirmation message is displayed.
STANDARDTEXTE
TECHNIK + NOTRUF2
Type the code 001998. The unit plays a melody and a confirmation message is displayed
.............
User Manual
Programming | en
35
F.01U.252.699 | V1.1 | 2012.01