Connecting To The Mains - Bosch F.01U.252.722 User Manual

NurseCall Relay Unit
3.2.5

Connecting to the mains

The NurseCall Relay Unit is powered by an adaptor (230/10 VAC or 115/10 VAC).
CAUTION!
In case of a different supply, the equipment must fulfill isolation requirements according to
EN60950 standard (last edition).
1.
2.
For connector wiring, see Section A.5.2 Power socket (unit bottom), page 34.
Bosch Security Systems
Plug the power adaptor into a power outlet placed near the unit. It should be easily
accessible at any time.
Connect the cable to the socket labeled 10V AC (1), under the unit.
1
User Manual
Installation | en 15
F.01U.252.722 | V1 | 2011.12