Bosch NurseCall Main Unit User Manual page 29

NurseCall Main Unit
10. Decide how many characters per information (criterion, floor, room, bed, position)
CRITERI<-
CRIT 07 + 0 SPACES
Choose 0 to 11 characters for the criterion, followed by 0 to 9 spaces.
Select a field with
11. If the FL,RO,BE display is selected, set the filter. The upper line shows the outcome.
INFO.: fff
FL:3+3 +RO:3+1 +BE:3
Select a field with
12. If the locating mode is activated, set the filtering of the position.
BE POS xyz
SPACES
To delete the POS indication, press
BE xyz
SPACES
Change the number of spaces (0-9) with
13. Set the beep codes that will be allocated to each pager.
HELP:7 ASSI:5 ACKN:2
To disable the message that indicates the beep code, press
instead of a value. To set a value again for the beep code, press
14. If you have activated the ESPA 4.4.4 protocol and deactivated the RPE 670 system, select
¬ PAGING ESPA 4.4.4.
NB.DIGITS : 3
15. Activate (YES) or deactivate (NO) the mix mode with
¬ PAGING ESPA 4.4.4.
MIX MODE : NO
16. Confirm with
Bosch Security Systems
should be filtered to the paging/DECT system. The upper line shows the outcome.
and
rrr 00b
and
: 1
: 1
Default values are, for HELP: 7; for ASSI: 5; for ACKN: 2.
BEEP CODE #=Disable
the number of digits (2, 3 or 4) with
.
, change a value with
, change a value with
. This is for pagers with only numeric indications.
and
and
¡
¡
User Manual
Programming | en
and . Confirm with
and . Confirm with
. Confirm with .
. A hash (#) then appears
. Confirm with
. Confirm with .
and .
F.01U.252.699 | V1.1 | 2012.01
29
.
.
.