Panasonic EASA-PHONE KX-T123210 Installation Manual page 63

,,........,.....................
A= 111 : to select boundary class I+..... default
121: class 2
131: class 3
q
4 :class4
151: class 5
q
6
:class6
171: class 7
q
: class 8
Description
" Toll Restriction" , if it is programmed, prohibits
CO Operator Calls. However, the desired
extensions can be permitted to call to CO
Operator by programming a boundary number
of service class.
CO Operator Calls are allowed at all the
extension from service class 1 to the same
service class number as the programmed
boundary number, but are prohibited at the
other extensions.
Example : If Boundary Class 4 is set for
All extension numbers for which service classes 1 to
4 have been assigned then CO operator calls are
allowed, but extensions assigned service class 5 to
8 will be prohibited from placing CO operator calls.
(See the table below.)
Boundary Class Number
I
Service Class of
Toll Restriction
I
7
DDDDDDAA
I 8 DDDDDDDA
A : CO Operator Calls are allowed.
D : CC Operator Calls are denied.
Programming
1. Dial (I 1).
" Operator Class" will be displayed.
2. Press the NEXT button.
" Boundary Class-l" will be displayed and
" 1" will blink.
3. Dial the boundary class number (1 through 8).
4. Press the MEMORY button.
The LCD will stop blinking.
5. To return to the initial program mode, press
the END button.
Programming table
See page 7-4.
See " Service Class Assignment of Toll
Restriction" on page 3-64.
3-19