Panasonic EASA-PHONE KX-T123210 Installation Manual page 27

CONNECTION
The Power Switch 07 the KX-T123210 must be off during wiring.
After all the wiring are completed, turn the Power Switch ON.
Mis-Wiring may cause the KX-Ti 23210 to operate improperly.
Refer " During Installation" page 6-l and " During Connection" page 6-2.
50 pin configuration and Color coding
(Refer page 2-l I.)
Max. length and kind of wire
(Refer pages 2-8, 2-14 and 2-16)
Insertion of Option Card
(Refer page 2-9)
Connection of printer
(Refer page 2-l 8)
If an extension does not operate properly (for example : The LCD of the KX-T123230 / KX-T61631 /
KX-T61630 / KX-T30830 does not display properly.), disconnect the telephone from the extension line
and then connect again, or turn OFF the power switch of the KX-T123210 and then ON again.
l This product is equipped with a 3-wire grounding type plug, a plug having a third (grounding) pin. This plug
will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug
into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the purpose of the
grounding-type plug.
l In areas of frequent electrical storms and/or power failures, we recommend for additional equipment
protection, surge protectors such as TELESPIKE BLOK MODEL TSB (TRIPPE MFG. CO.), SPIKE BLOK
MODEL SK6-0 (TRIPPE MFG. CO.), Super MAX' " (PANAMAX) or MPl (ITW LINX).
Paging Speaker 1
l Avoid using the same AC outlet for
office equipment and KX-T123210.
Use dedicated AC outlet only.
Paging Speaker 2
, .3 Surge Protector
Battery Adaptor KX-A26
Printer
B
m
A
.I 0
Car type batteries
Radio
0 Consisting of two 12VDC (24VDC)
2-5