Panasonic EASA-PHONE KX-T123210 Installation Manual page 187

OPERATION FOR A STANDARD TELEPHONE
(rotary and touch tone phones)
Making Calls
Description
Station to station dialing within the
KX-Tl23210 system.
Operation
Lift
handset
Dial extension
number
(100 through 199)
Automatic Line Access
Description
Each extension can automatically select an
idle CO (Central Office) line within the
KX-Tl23210.
Operation
Lift
handset
Dial "9"
Wait for
Dial phone
C.O. dial tone number
Individual Trunk Grout, Access
Description
Each extension can automatically select an
idle CO line within the same trunk group.
Through programming, 12 CO lines can be
divided up to 8 groups. See the page 3-46.
Operation
Lift
Dial "8"
Dial trunk
Wait for
handset
group
C.O. dial
number tone
L!f!l
(1 through a)
IP, _
7.:
.011
Dial phone
number
5-1
Description
There are 100 memory locations of system
speed dialing available.
Operation
Lift handset
Dial "x" Dial speed
access code (00 through 99)
l There is no need to access a CO line.
o A rotary phone will not function for
speed dialing.
l Continuous use of speed dialing is
impossible.
Description
Up to two doorphones (KX-T30865) can be
connected to the KX-Tl23210.
Operation
Doorphone 1
wmi
Lift handset
Dial "311"
Doorphone 2
M pm--/p]1
Lift handset
Dial "312"
Description
You can call the operator within the
KX-TI 23210 system.
This feature is required to be set
beforehand in the KX-T123210. For
programming, see page 3-9.
Lift
Dial "0"
Dial "0"
handset
or "1 "
l In case one operator is programmed, you
have only to dial 0.