Busy Station Signaling; Last Number Redial; Answer - Panasonic EASA-PHONE KX-T30810 Installation Manual

NO.
I:/
PRESSTHE
DSSBUTTON
escr
If
the extension you have dialed is busy, you call
inform that extension that another intercom call
is reuching by three beeps.
For use of this feature, the other extension is
required to be set this feature beforehand in the
KX- T30810.
the handset or press the SP-PHONE
button.
2. Press the DSS button or dial the extension
number.
3. When you will hear a busy tone, dial (1).
s
To answer your signal, see "Call Waiting" on
page 3-18.
While the other party is using a data equip-
ment, you may not be able to use this feature.
If
a busy tone is heard after dialing 1, it
indicates that the other party has not set this
feature.
3-8
LNR
El
LIWT
I
1
PRESS
ORPRESS
"LNR"
"SP-PHONE"
You may press the CO button to select the
CO line directly after lifting the handset or
pressing the SP-PHONE button.
The last phone number dialed on an outgoing
call to CO line can be redialed.
1. Lift the handset or press the SP-PHONE
button.
2. Press the LNR button.
You may press the CO button to select the CO
line directly after lifting the handset or pressing
the SP-PHONE button.
Up to 32 digits can be stored and redialed.
Pushing the "W I1 "#" or "PAUSE" button
counts as 1 digit.
When calling or while in the conversation
mode, pressing the LNR button will cause the
redial to operate after about 3 seconds.