Conditions; To Change; To Erase After Programming - Panasonic EASA-PHONE KX-T30810 Installation Manual

8. Repeat steps 4 to 7.
. To exit the speed dial entry, press the END
utton.
The LCD will show the initial program
mode, "ENTER PGM CODE".
oc
e
Repeat steps 1 to 9.
the 13 digits of a phone number, use
', or 'i@' button for scrolling the
display.
The LCD will show the stored phone
number.
The line access number (9, 81, 82 or 83)
should be stored.
When dialing, the pause is automatically
entered after line access number (9, 81, 82,
or
83).
Continuous use of speed dialing is possible.
EXW?pl6C
[AUTO] [Ol] [AUTO] [02]
In this case, speed access code "02" should not
include the line access number.
. Dial (01) or press the AUTO button.
"SPEED CALLING" will be displayed.
2. Press the NEXT button.
"ENTER SPEED CODE" will be dis-
played.
3. Dial (00 through 99) or press the NEXT
button, for speed access code entry.
The speed access code and the phone number
will be displayed.
. Press the CLEAR button.
5. Press the MEMORY button.
.
To advance to the next speed access code,
press the NEXT button,
To return to the previous speed access code,
press the PREV button.
To program desired speed access code, press
the SELECT button and then dial the speed
access code.
7. Repeat steps 4 to 6.
There is the phone number directory on page
5-12.
.
To exit the speed dial entry, press the END
button.
2-6