Toll Restrictions - Area Code Selection - Panasonic EASA-PHONE KX-T30810 Installation Manual

,,................-'"'
area code with 3 digits
NOTSTORED . . . . default (all memory locations)
(CLEAR)
I
[l l][NEXT][~~][~][MEMORY][END]
or
[l l][NEXT][MEXT][C][MEMORY][END]
~--------until the desired memory location number appears
For Service Class 3 (see "Toll Restriction-
Class Assignment" on page 2-17.), up to IO
area codes can be selected for use in toll dialing.
All area codes except those entered will be
denied.
All estensions programmed for Service Class
Selections 3 shall be assigned to the same area
code selection plan.
When Service Class 3 is programmed;
. Dial (11).
"RESTRC AREA CODE" will be display-
ed.
.
Press the NEXT button.
"ENTER CODE NO." will be displayed.
3. Dial (00 through 09) or press the NEXT
button.
Example:
When dial (00) or press the NEXT button.
The LCD will show "0O:NOT STORED"
when nothing is stored in memory location
number "00".
When the area code 212 has been stored,
"00:212" will be displayed.
. Dial the area code, with 3 digits.
To erase a wrong enter, press the CLEAR
button.
ress the MEMORY button.
The memory indicatior will be lit.
.
To advance to the next memory location
number, press the NEXT button,
To return to the previous memory location
number, press the PREV button.
To go to the desired memory location num-
ber, press SELECT button and the dial the
memory location number.
7. Repeat steps 4 to 6.
. TO
return to the initial program mode, press
the END button.
Example:
To allow extension 12 to access to New York
City and entire state of New Jersey, program the
llowing.
New York City has 2 area codes 212, 718 and
New Jersey 201, 609.
Enter 212 into the memory location number
"OO", 718 into "Ol", 201 into "02" and 609 into
"03".
STEP I.. .[lO] [NEXT] [NEXT] [SELECT]
[SELECT] [MEMORY] [END]
STEP 2...[1 l][NEXT][NEXT][212][MEMORY]
[NEXT][718][MEMORY]
WEWW1
I[ ORY]
[NEXT][609][MEMORY][END]
See page 5-15.
2-19