Programmable Operator Call - Panasonic EASA-PHONE KX-T30810 Installation Manual

'. AB=[*]: to assign the same on all 8 extensions
until the desired mode appears
[12] [NEXT] [iB] [SELkT] [MEMORY] [END]
or
[12] [NEXT] [NEXT] [SELECT] [ME
:-I--- until the desired extension number appears
Through programming, you can select which
extensions may be dialed Operator Call.
For to deny all the dialing that start from "O",
set to DISABLE.
I
"OPERATOR CALL" will be displayed.
s Press the NEXT button.
"ENTER EXT NO" will be displayed.
3. Press the NEXT button.
"11: ENABLE" will be displayed and
"ENABLE" will blink.
m Press the SELECT
button, to alternate be-
tween ENABLE and DISABLE to select the
desired mode.
5. Press the MEMORY button.
The blinking LCD will stop.
. Repeat steps 3 to 5, to program the assign-
ment
of
the other extensions.
7, To return to the initial program mode, press
the END button.
2-20
When you start the programming from step 1, you
may dial the desired extension number instead
of tile
NEXT button at step 3.
The PREV button allows you to go to the previous
extension
for
displaying the operator call selection.
Ope
or call dialing can not deny service class 1
of Toll Restriction.
Example:
To prohibit operator call on extension 12
[12] [NEXT] [12] [SELECT] [MEMORY] [END]
See page 5-1.5.