Embedding In The Wall - Pioneer PDP-502MX Manual

Special Installation (Embedding in the wall)

3.4.3 Embedding in the wall

Carefully read the following before trying to embed the unit in a wall, and make sure to observe all the limitations
specified below.
Be sure to mount the unit so that twisting, bending, or other deformation of the unit does not exceed 4 mm.
(1) Embedding in walls with space provided behind the unit (With no obstructions within a distance of 300 mm
from the back surface of the unit).
A
A
A
<Viewed from the Right Side>
Operating Temperature Restrictions
A: 0 to 370 mm
* The same operating temperature restrictions apply to the speaker system (PDP-S03-LR).
Operating Temperature Restrictions for Upside-Down Installations
* Upside-down mounting is unavailable when embedding this device in a wall.
30
Temperature in space X and Y
0 to 40 °C
X (Front of the unit)
Y (Rear of the unit)
<Viewed from Above>
A