Installation Of The Attachment Stand - Pioneer PDP-502MX Manual

4.3 Installation of the Attachment Stand

1.
Make sure to secure the attachment stand to the
display platform using M8 bolts (commercially
available) 25 mm longer than the thickness of the
platform.
Front
110
2.
Insert the supplied washer into the stand.
3.
Remove the main unit's A and A' hole rivets using
a screwdriver or coin.
A
Rear
A'
Installation of the Attachment Stand
4.
Insert the unit into the stand.
5.
Tighten the bolt against the washer so as to secure
the unit.
The unit weighs 40.3 kg., and its thinness
makes it unstable. Therefore, unpacking
CAUTION
and installation should be performed by
two or more persons.
Use a 6 mm hexagonal
wrench to tighten the bolt.
49