Setting The Mirror Mode - Pioneer PDP-502MX Manual

Integrator Mode

6) Setting the mirror mode

This function permits displayed images to be reversed in any fashion.
Normal playback
Left/right reversed playback
Up/down reversed playback
Up/down/left/right reversed playback = MIRROR MODE: XY
Normal playback
[MIRROR MODE: OFF]
Up/down/left/right
reversed playback
[MIRROR MODE: XY]
MIRROR MODE: XY is intended for smart cable arrangement, making it possible to draw bundled cables upward
(towards the ceiling) when this display is mounted upside-down using the ceiling suspension hardware PDK-5002.
(NOTE) In using the PDK-5002 mounting hardware, observe the operating temperature restrictions and other
limitations specified in section 4.4, "Plasma Display Ceiling Suspension Hardware: PDK-5002".
Factory preset:
1 Enter the integrator mode (refer to section 5.4.1, "About
the integrator mode").
The ID number of the unit of adjustment items will be indicated
in the upper right corner of the screen, where "– –" is displayed
in the illustration.
Select OPTION 1.
2 Move the cursor to "MIRROR MODE" and change the mode
with the SET button.
Pressing the "SET" button toggles the mode from "Off"
= "X" = "Y" = "XY" = then back to "Off" and so on.
MIRROR MODE applies to all inputs (INPUTs 1 to 4).
Select EXIT in screen 2 to return to screen 1.
116
= MIRROR MODE: OFF
= MIRROR MODE: X
= MIRROR MODE: Y
MIRROR MODE: OFF
Left/right
reversed playback
[MIRROR MODE: X]
Up/down
reversed playback
[MIRROR MODE: Y]
Screen 1
MENU
PICTURE R LEVEL
WHITE BAL. G LEVEL
]
SCREEN B LEVEL
SIDE MASK V. SIZE
3OPTION 1
CLK FRQ
OPTION 2 CLK PHS
DEFAULT
SUB VOLUME
ALL DEFAULT
MENU : MENU OFF
5∞ 3 : SELECT
Screen 2
OPTION 1
COLOR MODE R LEVEL
3MIRROR MODE : OFF
G LEVEL
]
BRIGHT ENHANCE B LEVEL
VIDEO V. SIZE
PC CLK FRQ
CLK PHS
OPTION 2
DEFAULT
DEFAULT
MENU : MENU OFF
EXIT
– –
: 128
: 128
: 128
: 128
: – – –
: – – –
– –
: 128
: 1
: 128
: 128
: 128
: OFF
: – – –
: OFF
: – – –