Notes
on
Adjusting
the
Convergence
Manually
Q
Allow the TV to warm up for about 30 minutes
before you adjust
the convergence.
Q
For best results, stand about 3 to 5 feet back from the picture
when adjusting
the convergence.
Begin with the crosses in the
center: area of the screen and, once those are adjusted,
move to the
crosses on the edges of the screen.
0
You can make separate
adjustments
to each wide mode:
Full/Normal, Zoom, W ideZoom, a nd Memory Sticki]080i
high-
definition
input. (These features share a common
convergence
mode.) The cross pattern
looks different
in each of these, but the
adjustment
procedure
is the same. Press the WIDEMODE button
on
the remote to toggle through
the wide mode screens.
Q
To optimize
the conditions
for: convergence
adjustment,
in the
Video Menu, set Modeto Pro or Movieand lower the Picturelevel
settings
(see page 92). You can reset the adjustments
by pressing
the RESET button on the remote control.