Sony KDP-51WS550 Operating Instructions Manual page 42

Setting Up the Channel List
After you finish connecting the T% you need to run the Auto
Program feature, which automatically croates a list of available
analog and digital channels. The Auto Program screens appear when
you turn on your TV for: the first time after: hooking it up.
Using Auto
Program
To runAutoProgram thefirst timeyouturnon yourW
1
Press POWER t o turn on the TV.
The Initial Setup screen appears.
2 Using the joystick on the remote control, move the highlight to
the desired language, then press O to select that language.
3 When prompted to start Auto Program, pross O to select Yes.
Auto Program takes several minutes to complete. A progress bar is
displayed while the channel list is being created.
To run Auto Program again at a later time
n Use the Auto Program feature as described on page 98.
Toadd individual d igitalchannels
O Use the Digital Channel feature as described on page 98.
To resetthe TVto factorysettings
1
Press POWER t o turn on the TV,
2
Hold down RESET on the remote control.
3
Press TVPOWER o n the TK (The TV will turn itself off, then back
on,)
4
Release RESET.
41