Sony KDP-51WS550 Operating Instructions Manual page 44

Adjusting the Convergence Manually
The Convergence _ eah_re gives you more control over_e pic_re_
convergence than the Flash Focus feature, allowing you to fine4une the
co_v_l'gei_e.
L_Fo_ detais or_Jsrg the
SetJprCeriu, s ee page103.
1
2
Press MENU to display the Menu.
Move the joystick 4. or ._ to highlight the Setup icon and press
O.
Move the joystick to highlight
Convergence and press O.
A pattern of white crosses appears, with a yellow [ ; around one
of the crosses. Aligned crosses (which do not need adjustment)
look white and have little or no red or blue showing. Crosses that
are not aligned show red or blue shades beyond their edges.
-I- -I- -I- -I- -I- -I- -I-
-I- -I- -I- -I- -I- -I- -I-
-I- -I- -I- -I- -I- -I- -I-
-I- -I- -I- -I- -I- -I- -I-
+ + + + + +
-I- -I- -I- -I- -I- -I- -I-
4- FulllNormal -I-
-I- MovetJ,*-_ Select: • End: Menu -I-
-I- -I- -I- -I- -I- -I- -I-
You can scroll up and down through the 9 x 7 field of crosses to
manually converge all portions of the screen.
4
Using the joystick, move the [ 7 to sin:round a cross that you want
to adjust. Pross O. The F; changes to red.
5 If the cross that you selected has red edges, move the joystick
until the red image is replaced with a white cross. Once you have
finished this (or the cross does not have red edges), press _. The
[ ; changes to blue.
6 If the cross you selected has blue edges, move the joystick until
the blue image is replaced with a white cross. Once you have
finished this, press _. The F ] changes to yellow again.
7 Repeat steps 4 to 6 to adjust other crosses. When finished, press
MENU to exit the Setup Menu.
43