Samsung DIGIMAX A403 User Manual page 58

Tire camera suddenly stops working while in use
. The camera was stopped due to a malfunction
Remove/re-insert battery and switch the camera on
Tire images are unclear
- An incorrect focus mode is selected•
Select a correct focus mode related to the distance.
- The picture was taken with the subject beyond the flash range
Take a picture within the flash range
- The lens is smudged or dirty
Clean the lens
Tire flash does not fire
- Flash off mode has been selected
Disengageflash off mode
- The camera mode can't use tire flash
Referto the FLASH instruction (p.18)
Incorrect date and time is displayed
- The date and time have been set incorrectly or the camera has adopted the
default settings
Resetthe date and time correctly
Tire camera buttons do not operate
- Camera malfunction
Remove/re-insert battery and switch the camera on
A card error has occurred while the memory card is in the camera.
- Incorrect memory card format
Refomqatthe memory card
The images don't play back
• Incorrect file name (Violation of DCF format)
Do not change the image file name
Colour of image is differentto the original scone
• White balance setting is incorrect
Selectappropriate White balance
Images are too bright
• Exposure is excessive
Reset exposurecompensation
When using the PC's explorer, the [Removable Disk] file does not show
Cable connection is incorrect
Check the connection
The camera is off
Turn the camera on
Tire operating system is not Windows 98, 98SE, 2000, ME, XP/Mac OS 10.0
10.3. Alternatively the PC does not support USB.
install Windows 98, 98SE, 2000, ME, XP/Mac OS 10.0 _ 10.3 to PC that
supports USB.
The camera driver is not installed
Installa [USB Storage Driver]
(57}