Samsung DIGIMAX A403 User Manual page 56

• tf the camera is exposed to an electronic interference, it will turn itself off to
protect the memory card•
• Camera Maintenance
- Usea soft brash (availablefrom photo stores) to gently clean the lens and LCD
assemblies, ff this does not work, lens-cleaning paper with lens cleaning fluid
can be used.
Clean the camera body with a soft cloth. De not a_lowthis camera to come into
contact with solvent materials such as benzol, insecticide,thinners etc. This
may damage the body shell of the camera and also affect its performance.
Rough handling candamage the LCD monitor. Take care to avoid damage
and keep the camera in its protective carry case at all times when not in use.
• Do not attempt to disassemble or modify the camera.
• Under certain conditions, static electricitycan cause the flash unit to fire. This is
not harmful to the camera and is not a malfunction.
• Before an important event or going on a trip, you should check the camera
condition.
- Take a picture for testingthe camera condition and prepareextra battery.
- Samsung cannot be held responsiblefor camera malfunctions.
• There are several warnings that may appear on the LCD display
CARD ERROR!
• Memory card error
Turn off the camera power and turn it on again
Insertthe memory card again
Insertthe memory card and format the memory card (p.51)
MEMORY ERROR!
• Internal memory error
Turn off the camera power and turn it on again
Format the memory with the memory card removed. (p.51)
CARD LOCKED!
• The memory card is locked
SD memory card : Slide the write protect switch to the top of the memory card
CARD FULL!/MEMORY FULL!
• There is insufficient memory capacity to take an image
Insert a new memory card
Delete unnecessary image files to free up some memory
NO IMAGE!
• There are no images stored on the memory
Take images
Insert a memory card that is holding some images
(55_