KAPL12327-E
An invalid entry is registered in the file. File name = aa...aa
Details
aa...aa: The name of the file containing the invalid entry
Action
Take the following actions depending on the file name output, and then re-execute
the
dlmmkinitrd
In the case of
Edit the following lines as described in 3.7.5 Settings for Using a Logical
Volume (LVM2) on an HDLM Device as a Boot Disk or 3.7.6 Upgrade
Installation in an Environment Where a Logical Volume (LVM2) on an
HDLM Device Is Used as a Boot Disk:
• filter
• types
• md_component_detection
In the case of
Install an HBA driver, which is supported as a boot disk by HDLM.
Or use an HBA, which is supported as a boot disk by HDLM.
In the case of
The OS environment is incorrect. Add the names of the HBA drivers that
have to be included in the initial RAM disk image into the
INITRD_MODULES=
KAPL12328-I
Execution of linuxrc completed.
Action
None.
KAPL12329-I
The utility for supporting the boot disk started.
Action
None.
KAPL12330-I
The utility for supporting the boot disk completed.
Action
utility.
/etc/lvm/lvm.conf
/etc/opt/DynamicLinkManager/dlmmkinitrd.conf
/etc/sysconfig/kernel
line of the
/etc/sysconfig/kernel
file
file
8. Messages
file
file.
651