target paths before you execute the
connected to a specific HBA port or CHA port.
Example 1
The following example shows how to filter and display the information on all
paths that pass through the HBA port whose host port number is
number is
:
0000
# /opt/DynamicLinkManager/bin/dlnkmgr view -path | grep
0004.0000
The above command will display information on all the paths that pass through
the specified HBA port.
Example 2
The following example shows how to filter and display the information on all
paths that pass through the CHA port
# /opt/DynamicLinkManager/bin/dlnkmgr view -path -stname |
grep 9500V | grep 0A
The above command will display information pertaining to only those paths that
pass through the specified CHA port.
operation to place online all the paths
online
of the Thunder 9500V series:
0A
6. Command Reference
and bus
0004
413