4
Loosen the three screws on the
lamp with the Phillips
screwdriver. Hold up the handle,
then pull the lamp straight out.
6
Close the lamp cover, then
tighten the screws.
5
Hold the handle of the new lamp
and push it in securely
until it
reaches the end, and then
tighten the 3 screws.
lfthe lamp cover is uot sel securely, the power
will nol turn on.
7
Remove
the air filter cover.
• Be carelul not to touch the optical block
inside the unit.
• lfthe 3 screws are not tightened
securely, the lamp cover will not close.
8
Remove
the air filter.
56