Position - Sony BRAVIA HDMI VPL-AW15 Operating Instructions Manual

ScreenArea
V Center
VerticalSize
AdjustSignal
Selects the size of the picture when a Hi-Vision picture is
overscanned.
Full: Expands the picture ou ttle wtlole off the screen.
Through: Does not expands the picture on the whole ol the screen.
This item is effective only when a Hi-Visiou signal (preset memory No.
10 and 1l ) is input and "O11" is selected in "Over Scan".
Adjust the whole picture by moving up and down on the screen.
The entire screen moves up as tile selected }ltllnber increases and moves
down as the selected number decreases.
This item is adjustable only when "Zoom" is selected.
Reduces or enlarges the picture vertically.
The screen is enlarged as the setting increases and reduced as the setting
decreases. If the subtitle of a movie, etc. cannot be seen, use this together
with "V Center".
This item is adjustable only when "Zoom" is selected.
You can adjust the input signal
APA: A_[justs the position of the image signal automatically for
"Phase". "Pitch", and "Shill".
Phase: Adjusts the dot phase of the panel and the computer signal.
Adjust the picture to the point where it looks clearest.
Pitch: Adjusts the horizontal size of the picture from a computer.
The higher the setting, the wider the picture. The lower the settiug, the
narrower the picture. Adjust the setting to match the number of dots of
the input sigua}.
Shift: Adjusts the position oI the picture.
H: As the settiug R>r H (horizontal) increases, the picture moves
to the right, and as the setting decreases, the picture moves to
the left. Use _ / '_ to adjust the horizontal position.
V: As the setting For V (vertical) increases, the picture moves up,
and as the setting decreases, the picture moves down. Use
'1_ / _" to adjust the vertical position.
c
u)
c
45