Hitachi WNM80 User Manual page 9

2. Playback Mode
Images transmitted to the projector in Live Mode can be replayed from the projector side (*3).
You can also send images to the projector from the PC in advance (*4).
Regardless of the method chosen, you can select the image you wish to display or even select
multiple images for consecutive playback by viewing the corresponding thumbnail images
stored on the projector side (*5).
Print
(*3): Use the
Screen
(*4): Refer to
(*5): Refer to
3. PC-less Presentation Mode (*6)
In order to use PC-less Presentation Mode, you need to store your presentation data (*7) into a
memory card (*8). Next, insert the memory card into the projector and you are all ready to make
a presentation with just the projector. No need for a PC! The presentation is played just as
described in Playback Mode.
(*6): Since there is only one card slot, you can't use the wireless LAN card when in this mode.
(*7): You can only use still image files of the following extensions: .jpg, .bmp and .png.
(*8): You can use any of the following types of memory cards:
PCMCIA compliant memory card
CF memory card (dedicated PCMCIA adaptor required)
SD card (dedicated PCMCIA adaptor required)
Memory Stick (dedicated PCMCIA adaptor required)
HDD card (ATA compatible; less than 2GB) (IDE compatible HDD cards can't be used)
Microdrive (dedicated PCMCIA adaptor required; ATA compatible; less than 2GB)
NOTE
Only memory cards under 2GB can be used. Memory cards formatted to 2GB or more can't be used.
Reformat memory cards to under 2GB as necessary. (Refer to your memory card user guide for details.)
4. Remote Control Mode
The WNM80 incorporates the latest LAN functions, enabling you to not only make presentations,
but also control the projector using a control panel that you interface to using your Web
browser. Remote control functions available include, turning the projector's power on and off,
and selecting between image sources.
This feature also provides you with such information as when the projector's lamp needs to be
replaced. Even if the projector is located in an office room away from your current location, you
can easily operate it via remote control.
If you opt to not to use the wireless LAN card, you can still directly connect your computer
using a LAN cable. Be sure to use a cross cable when directly connecting to just one PC. Use
a straight cable for connecting to the closest hub of your company LAN.
NOTE
Consult with your network administrator prior to attempting to connect to your company's LAN.
key on your PC keyboard to capture images for replay in Playback mode.
for detailed information on how to use FileViewer.
for detailed information on how to use ImageViewer.
(IDE compatible HDD cards can't be used)